1. The installation site should be well ventilated, the
Generator end should have sufficient air inlet, and the diesel engine end should have a good air outlet. The area of the air outlet should be more than 1.5 times the area of the water tank.
2. The area around the installation site should be kept clean to avoid placing nearby items that can produce corrosive gases and vapors such as acid and alkali. Conditional fire extinguishing devices should be provided.
3. If it is used indoors, the exhaust pipe must be opened to the outside, the diameter of the pipe must be ≥ the diameter of the pipe of the muffler, and the elbow of the pipe to be connected should not exceed 3 to ensure the smooth discharge of smoke, and should be The pipe is inclined downwards by 5-10 degrees to avoid rainwater injection; if the exhaust pipe is installed vertically upwards, a rain cover must be installed.
4. When the foundation is made of concrete, the level should be measured with a level gauge during installation to fix the unit on a level basis. There should be a special shock pad or foot bolt between the unit and the foundation.
5. The outer casing of the unit must have a reliable protective grounding. For generators that need to be grounded directly at the neutral point, the neutral point must be grounded by a professional and equipped with lightning protection devices. Neutral grounding devices with commercial power are strictly prohibited. Point directly to ground.
6. The bidirectional switch between the generator and the mains must be very reliable to prevent reverse power transmission. The wiring reliability of the bidirectional switch is subject to inspection and approval by the local power supply department.
7. The wiring of the starting battery must be firm.
June 19, 2019
